Element-Z Solid Zirconia

Element-Z full contour solid zirconia is the NEW natural option for posterior restorations. This solid zirconia restoration requires no porcelain overlay and provides both strength and esthetics. Its chip-resistant quality makes Element-Z the preferred treatment option. Element-Z crowns and bridges are milled to full contour using a solid zirconia that is 26% more translucent than conventional zirconia, resulting in more natural looking restorations. This monolithic material provides ultra-thin, yet strong, posterior restorations that provide the strength to support thin posterior single unit crowns to long-span bridges. Element-Z requires minimal tooth reduction of 0.5mm to 1.0mm; making it the conservative option for both the patient and clinician. Element-Z is available in all 16 VITA shades, offers a flexural strength of up to 1,200 MPa, and can be used for cement-retained and screw-retained implant crowns as well. Read more about Element-Z.

Fabrication Options:

  • From your design file, you stain & glaze – 2 Days
  • From your model work, you stain & glaze – 3 Days

Ultra-Z Esthetic

Ultra-Z Esthetic is designed specifically to answer the need for esthetic and functional requirements of the anterior region. Ultra-Z is milled from one of the highest translucency zirconias on the market – Katana UTML. This zirconia disc is pre-layered with gingival, body, and incisal shading which virtually eliminates any shading difficulties. Measuring at a 550 MPa with translucency and color similar to natural dentition, Ultra-Z Esthetic is the perfect esthetic solution for your anterior restorations. This material requires less reduction than monolithic glass ceramic restorations but remains gentle on opposing dentition. Read more about Ultra-Z Esthetic.

Fabrication Options:

  • From your design file, you stain & glaze – 2 Days
  • From your model work, you stain & glaze – 3 Days

IPS e.max

IPS e.max® is the most exciting crown material to date! IPS e.max is lithium disilicate glass-ceramic, digitally fabricated through the use of CAD/CAM technology. With pricing comparable to a non-precious PFM and the ability to conventionally cement in posterior or anterior regions, you simply cannot go wrong by prescribing this material. Please remember to take a stump shade in addition to the final crown shade- lithium disilicate is translucent and unable to block out the two darkest stump shades. Read more about IPS e.max.

Fabrication Options:

  • From your design file, you stain & glaze – 2 Days
  • From your model work, you stain & glaze – 3 Days

Forte YZr Zirconia

Forte YZr Zirconia crowns and bridges are available exclusively from Oral Arts. Named “Forte” for its incredible strength, measuring 1,000 to 1,400 MPa. “YZr” signifies the zirconia has been infiltrated with Yttrium, a stabilizing ingredient that greatly reduces the risk of coping fractures. Marginal integrity is superb by using state-of-the-art, 4-axis milling technology. Forte YZr is available in 11 core shades and suitable for bridges up to 12 splinted units, making it the most versatile zirconia on the market! Read more about Forte YZ Zirconia.

Fabrication Options:

  • From your design file – 2 Days
  • From your model work- 3 Days

CAD/CAM Oral-Temp Provisionals

Our Oral-Temp provisionals are a highly aesthetic solution for your provisional needs. Oral-temps are fabricated using state of the art CAD/CAM technology. We prep your pre-operative model, scan using laser technology, fabricate your temporary bridge with ideal contour, contacts, and occlusion and mill from a solid block of Vita shaded PMMA (Polymethylmethacrylate). Our CAD/CAM process delivers a very dense temporary that eliminates pitting or porosity associated with other layered or flow-able techniques. When you receive your case simply reline the Oral-Temps chair-side for an esthetic long term provisional option. Read more about CAD/CAM Oral-Temp Provisionals.

Fabrication Options:

  • From your design file – 2 Days
  • From your model work- 3 Days

PFM Restorations

Porcelain Fused to Metal Porcelain-fused-to-metal (PFM) restorations are fabricated using CAD/CAM technology resulting in a metal coping with a porcelain surface. Oral Arts uses only the highest quality alloys from Ivoclar Vivadent or Argen alloy manufacturers. Our porcelains are supplied by Ivoclar and Noritake. We do not cut corners or risk patient health by outsourcing PFM’s to foreign countries. PFMS are an excellent option for dentists who seek a restoration that combines both durability and natural-looking internal characteristics. The underlying coping replicates the performance of a natural tooth, while the ceramic coating replicates the natural esthetics. Read more about PFM Restorations.

Fabrication Options:

  • Porcelain to base from your model work – 3 Days
  • Porcelain to base PFM bisque bake from your model work – 3 Days
  • Porcelain to noble from your model work – 3 Days
  • Porcelain to noble PFM bisque bake from your model – 3 Days

Vitallium® 2000 Cast Partial

Oral Arts uses the highest yield strength chrome-cobalt alloys to cast our partial frameworks resulting in smaller, thinner partial framework and more resilient clasps. We can fabricate any of your combination cases or precision attachment cases with ease. With only 10 days in-lab to fabricate framework, setup, process, and finish ensures you can confidently send us your cast partial cases today. Read more about Vitallium® 2000 Cast Partial.

Fabrication Options:

  • From your model work – 5 Days

TCS Unbreakable

tcs® Unbreakable is a flexible denture base resin which is ideal for partial dentures and unilateral restorations. The resin is a biocompatible nylon thermoplastic that allows your patient’s natural tissue tone to appear through the material. The translucency of the tcs material makes it the ideal product for cases when patients don’t choose a fixed restoration or implant, but still want a highly esthetic restoration or implant. Read more about TCS Unbreakable Partials.

Fabrication Options:

  • Process from your setup – 5 Days

DuraFlex Flexible Partial

DuraFlex™ is an FDA cleared flexible partial denture and can easily be adjusted chair side, if needed. Duraflex™ is highly translucent and blends incredibly well with your patients existing soft tissues, making this partial virtually indistinguishable in the mouth. This partial is available in 4 shades to perfectly match gingival tissue tones. Oral Arts can repair, rebase, or add teeth to existing DuraFlex™ partials. Read more about DuraFlex Flexible Partials.

Fabrication Options:

  • Process from your setup – 5 Days

QuietNite

The QuietNite, a mandibular re-positioning and advancement device is intended for the treatment of snoring and mild to moderate obstructive sleep apnea in persons 18 years of age or older. The QuietNite consists of two separate thermal forming trays, which fit over the upper and lower arches. The trays are connected by two lateral rotating connectors, which gently pull the lower jaw forward. Patients can adjust the connectors to meet their comfort level at home. Snoring research has shown that custom fabricated dental devices worn at night that move the lower jaw into a forward position, increase the three dimensional space in the airway tube which reduces air velocity and soft tissue vibration. By increasing the volumetric capacity of the airway and preventing soft tissue vibrations, snoring is eliminated. In practice, the dentists that prescribed oral devices have exhibited initial snoring prevention success rates of over 70%. Read more about the QuietNite Sleep Apnea Device.

Fabrication Options:

  • From your model work – 3 Days

Myerson EMA

Myerson’s EMA device is a simple, patient-friendly oral appliance created for noninvasive, nonobtrusive treatment of Sleep Apnea and Snoring. The primary treatment mechanism of opening the bite and gently moving the mandible forward is achieved with the use of interchangeable elastic straps that offer varying degrees of mandibular advancement. This comfortable device can be adjusted at home using one of four different strengths of elastic straps that match the strength of the pull to the musculature of the patient and minimizes tooth movement. Read more about the Myerson EMA.

Fabrication Options:

  • From your model work – 3 Days

Oral Arts Custom Abutments

Oral Arts custom abutments provide ideal margins, gingival contours, and emergence profiles for cement retained restorations. Our custom abutments are a preferred choice for difficult scenarios such as extreme angulation of the implant or when the implant depth is too far subgivingal. Prescribing an Oral Arts custom abutment allows esthetic requests to be obtained and is comparable in price to stock abutments. Read more about Oral Arts Custom Abutments.

All abutments are available in titanium, gold hue, or zirconia.

Fabrication Options:
  • Custom Titanium Abutment – 3 Days
  • Gold Hue Abutment – 3 Days
  • Custom Zirconia Abutment with Ti-Base – 3 Days

Element-Z Screw-Retained Hybrid

The Element-Z Screw-Retained Hybrid is a fixed, all ceramic implant solution offering a stable and esthetic solution for your edentulous patients. Constructed from 100% Solid Zirconia with pink tissue, this bridge is the ultimate in strength and longevity. With predictable lab fees and easy retrievability for hygienic appointments, the Element-Z Screw-Retained Hybrid is THE implant solution of choice! Read more about the Element-Z Screw-Retained Hybrid.

Fabrication Options:

  • Sintered – 5 Days